DIMENSIONS (APPROXIMATE):
HEIGHT: | 1.346m (55”) |
LENGTH: | 3.500m (137.7”) |
WIDTH: | 1.55m (61”) |
TOWING HEIGHT | (Level) 420mm |
UNLADEN WEIGHT: | 375kg |
LANDEN MAX: | 1500kg |
CHASSIS:
Constructed from 80 X 80 RSA. fully welded with a ‘T’ frame drawbar, all fully hot dipped galvanised. 5mm sheet front mounting plate.
Technical Specifications
AXLE/SUSPENSION:
Knott-Avonride 1500kg rubber torsion beam axle fitted with 200 x 50 auto-reverse brakes. 4 stud 5 1⁄2” pcd hubs
WHEELS AND TYRES:
2 no. 175 x 13 x 8 ply tyres.
COUPLING:
Knott-Avonride 2000kg auto reverse coupling fitted with 40mm eye or 50mm ball, breakaway cable, and spring assisted hand brake lever.
TANK:
Polyethylene moulded tank elliptical in section, baffled & fitted with a 22” lockable outer hinged manlid cover, inner sealed vented manlid. Tank secured to chassis with 2 stainless steel straps.1 rear tap fitted, 2” bottom drain underneath the rear of the tank. 2 rear outlets.
PUMP:
Yanmar electric start L100 10HP engine driving a 200 Bar (3000 psi), 15Lpm piston pump c/w hand lance & 9m of hose stowed on the bracket. Fuel consumption approx 1.5L/Hr, running time approx 2.9Hrs
ANCILLARY EQUIPMENT:
Moulded mudguards, mud flaps, front telescopic jockey wheel, Side reflectors, Front reflectors, rear lighting board c/w 13 pin plug, and 7 pin adapter.
FINISH:
Tank moulded in yellow, blue, red, or green polyethylene. Chassis galvanised.
RAINMAKER OPTIONAL EXTRA:
Trailer Engineering also offers the Rainmaker / Pressure washer combination which is a NEW and innovative product to the dust suppression industry. Offering a budget alternative to the very expensive dust cannon and dust fan machines. This is a customised version of the standard 3000 psi diesel pressure washer water bowser. It comes with the Rainmaker fitted onto the pressure washer for a controlled suppression of dust, perfect for building and demolition sites. This multi-functional water bowser only uses 15LPM at any time. If you already have a pressure washer and would like to convert it, Trailer Engineering also offers a retrofitting kit for the Rainmaker which comes with the Rainmaker mast and spray nozzles. A two-way high-pressure valve, a high-pressure hose, and connections. Trailer Engineering’s Rainmaker can be fitted to any 3000 psi pressure washer with this kit. See the Rainmaker in action in the videos below.